Genoa Measurement form (for sail ordering)

Home

Name Phone # Boat Year Hull #

Hoisted Measurements

With tape rule fully hoisted on the jib halyard, please measure:

A- To the feeder (if any)

B- To the bearing surface of the tack fitting

C- To the intersection of the headstay and the deck

D- To the cabin house at the mast

E- To the hull-to-deck joint

F- Pass the tape measure around shrouds as if it was the leech of the sail, then measure to the forward end of the track. Pull tight.

G- Pass the tape measure around shrouds as if it was the leech of the sail, then measure to the aft end of track

Deck Level Measurements

	Headstay - Aft		Centerline - Out
	H- From the Headstay/Deck intersect to the fwd edge of track		K- To the shroud base
	I- From the Headstay/Deck intersect to the aft edge of track		L- To the fwd edge of track
	J- From the tack shackle the leading edge of mast		M- To the aft end of track

Comments or notes:

Luff Tape Size?_________ (or Forestay Diameter for Hanks Sizing?__________)

Freeboard Measurements (for shear line and sheeting angle) - Tip of the bow DOWN to the waterline?__________ Along the rail,at the mast, DOWN to the waterline?__________

Back to Cruising Page / Back to Racing Page